1979 Camaro Spotters Guide & New Features 1979 looked to be a fantastic year but teetered on the dumper with the gas crisis and problems with a certain peanut farmer. Despite the uncertaintly the 1979 Camaro set a sales record with 282,582 Camaros produced, including a …

2001年9月10日 · one of the wires should be the main power feed for the car, and goes under the battery cable on the big stud. the other wire should be purple and goes on one of the other studs on the solenoid next to where the battery cable goes. this is the wire that comes from the switch and activates the starter. i can't remember which stud it goes on, but try it on one, and if it …

In 1970 the rear end was built in both 10 and 12 bolt versions. In 1971, GM instituted a standardized "corporate" rear axle. This rear end was available in a 10 bolt version only. The 1970 12 bolt version will bolt into any second generation Camaro and quite often is done so in high power applications. Description

2010年9月28日 · Hello guys, I have a 10 bolt rear end out of a '79 camaro that has an open differential and drums. the width is 62.5 WMS to WMS. I have found a 10 bolt out of an '83 camaro that has a factory posi and disc brakes. Are these two axles the same width? I'm not worried about where spring pads and mounting locations are, just the width.

2008年10月23日 · 2nd Generation Camaro Wheel & Tires Fitment Chart For those who are interested in buying new wheels and tires for his 2nd generation F-Body (Camaro & Firebird) sweetheart, Steve from Nasty Z28 forum prepared a nice and clear spreadsheet with combinations that fit. Potential issues with fitment such as interference, rolled lip, suspension …

2004年6月20日 · on 79 (and probably later) camaros, the neutral safety switch is operated differently than the earlier cars. When it comes to adding an aftermarket shifter or transmissions, locating the right wires can be a real challenge. The reverse light switch is located on the steering column near the firewall like usual. It is a pink/white and green wire.

2011年7月29日 · All 2nd gen Camaro batterys were side mount styles. Batterys up until 1975 had caps and required maintenance. Standard battery was an R79, with optional being R89. The Delco Freedom sealed battery debuts in 1976. The 6-cylinder battery was rated at 2300 watts - 45 amps. Standard V8 battery was rated at 2900 watts - 61 amps.

2009年10月3日 · I am going to be doing the same job on my 73 camaro.My plan was that as long as the floor over the framerails was good,I was going to start by running a bunch of self tapping screw up into the floor right alongside the frame on each side before removing it.I would then remove the screw,then the rear rails,and when I put the new rails in I would drill holes in the …

2011年11月10日 · Second Generation Camaro Owners Group - Camaro Dashboard Restoration Camaro dashes come in a couple styles, 1970 - 1978, in either A/C or non-AC styles. 1979 - 1981 dashes are different from the earlier style, and they'll fit either a/c or non-a/c. Camaro dashes are notorious for warping right in front of the passenger side.

2007年3月25日 · First Generation Camaro Info and Tech - 1967-1969. Body Shop Front Inner Wheel Well Installation ...