In metro and urban areas, the EIRP is limited to 1 watt per 10 MHz frequency block, or 2 watts for 20 MHz block, with an antenna height limit of 10m. In rural and remote areas there can be one of the following two options for EIRP and antenna height: …

In May 2017, ISED published a document announcing new regulations for the UNII1 band in Canada. Previously, this band was reserved for indoor use and the maximum EIRP was set to 200 mW. The new regulations now allow the use of these frequencies to be used both indoor and outdoor with a higher power.

2015年8月28日 · So here’s a list of the maximum allowed transmission power (EIRP) per country. Note that the a and b bands means the 802.11/a (5GHz) and 802.11/b (2.4GHz) respectively. While these are not specifically named, this includes 802.11ac, 802.11n, 802.11g and the collections such as 802.11abgn.

For Wi-Fi devices operating the UNII2 and UNII2-Extended, Industry Canada states that “ devices with a maximum e.i.r.p. greater than 500mW shall implement TPC in order to have the capability to operate at least 6dB below the maximum permitted e.i.r.p. of 1W “. This information can be important to keep in mind while designing a WLAN.

Following the publication of Health Canada’s Notice: Localized human exposure limits for radiofrequency fields in the range of 6 GHz to 300 GHz, Innovation, Science and Economic Development Canada (ISED) is in the process of developing exemption limits for routine localized power density (LPD) evaluations, which are to be included in the upcomin...

This technical guideline, entitled GL-01, Issue 4, Guidelines for the Measurement of Radio Frequency Fields at Frequencies From 3 kHz to 300 GHz, replaces GL-01, Issue 3, published in March 2015. Issue 3 has been revised in its entirety to be in accordance with the latest version of Health Canada’s Safety Code 6 guidelines.

2021年7月9日 · The maximum permitted effective isotopically radiated power (EIRP) for an RLAN device is 30 dBm. The maximum permitted power density for an RLAN device is limited to 5 dBm/MHz. The bandwidth used by an RLAN device cannot exceed 320 MHz.

Specifically, addresses the "maximum EIRP spectral density" equipment design parameters. EIRP limits of various regulatory agencies are reviewed. The tightest limits, proposed for adoption in Canada, are proposed for the 802.16.2 coexistence practice. These limits are shown to be consistent the technology most vendors propose for LMDS.

Fixed or base stations operating in urban areas are limited to a maximum allowable e.i.r.p. of 1640 watts/MHz e.i.r.p. Base station antenna heights above average terrain may exceed 300 metres with a

For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts.