2021年3月9日 · 10-Frame WBC Hive – Steve Moye The photos below are of my WBC (W.B.C. = William Broughton Carr) double walled hive adapted to accept 12 medium Pierco frames. The hive was built using the Langstroth 10-frame plans posted on this Beesource.com website with modifications for dimensions and 3/4″ lumber. Steve Moye Mount Olive, NC Steve_Moye ...

2016年7月26日 · Of course, you aren't going to move a 4 foot long hive easily, and I don't plan to. The hive alone is about 100+ lbs. I made it with really thick old redwood that was scrap from a retaining wall. So, I don't think its the ideal hive for producing honey, but if you run several hives, I think its an ideal hive for supporting your apiary.

AZ/Langstroth Hive Left Side 3 4in 261 8in 1 4in 1in 3 4in 41 16in 1015 16in 1713 16in 11 2in 12in 221 2in 37 8in.375 Wide 32 .25 Deep 3 4in 23 8in 33 4in 11 4in 113 4in 221 4in 41 2in.50 Wide.375 Deep Note: Right Side is Mirror Image

2017年3月15日 · I built a russian (Lazutin) hive based on plans from that website. Raised bees in that hive until around end of may 2016. Long story short, I ended abandoning that hive and just sliced in half (horizontally) and got two long hive boxes each about standard deep frame depth. One hive is overwintering in the deep height long box now.

2018年11月12日 · I came across plans and a link to a Langstroth Slovenian AZ hive being old. I'm thinking about purchasing one so I can reverse engineer it. Just not sure I want to commit to the undertaking as I have plenty of winter projects already. Just thought I'd share as these are the 1st set of detailed plans I came across.

2012年7月23日 · Except, if I run the same formula for the 10-frame plans, I don't come up with the same dimensions... If you figure the aggregate wiggle room for the 10 frames (14.75-1.375*10) you end up with a full inch of wiggle room. That inch of wiggle room doesn't divide nicely by the number of frames.

2014年4月9日 · Basically the idea would be a topbar hive design with straight walls, frame rests and deep frames. The reasons I want to do this are basically to get to benefits of using frames -- the comb would be reusable, extractable, and people could get nucs from Langstroth beekeepers.

11-1/4") for the deep hive body. Start by cutting the boards to length. For fronts and backs, cut them a smidgen over 16-1/4". For sides, cut a smidgen over 19-7/8". At this point, follow the steps described on how to make a box joint from the PDF ’Box Joint’ files. Now that you have the joint cut and the boards cut to finished

2017年2月23日 · Convert that nuc over to langstroth hive dimensions and it works just fine. All your doing is cutting the front and back 3/8" deep x 3/4" (Half the thickness of Pine 3/4") 2 times around the height of the sided front/back board.

2024年4月3日 · Inline Long Langstroth - an inline frame horizontal hive made for Langstroth frames Collateral Langstroth Horizontal Hive - multiple box inline frame horizontal hive made for Langstroth frames Reactions: jtgoral , Charles Prestridge , Tigger19687 and 1 other person