2018年9月27日 · When using a sawset, start at one end of the saw and work your way down, setting each alternate tooth so you don’t lose track of your pattern (ripcut / crosscut) and end up setting the teeth in the wrong direction. Set every other tooth one way, then turn the saw end for end and repeat the process on every intermediate tooth.

2024年3月4日 · By following these steps, you can properly adjust and set the teeth of a saw using a saw set tool. This process will help maintain the performance and effectiveness of your saw, allowing you to achieve clean and precise cuts in your woodworking projects.

In this article we'll investigate what set is, figure out how much is needed, and discuss how to properly apply it. Saw set is the slightly increased thickness of the blade at the cutting edge.

2018年9月27日 · A sawset is used to carefully and accurately bend the teeth of a saw to develop a kerf wider than the saw plate to avoid it binding as the saw passes into and through the cut. The sawset bends the teeth away from the plate, it is used to bend every other tooth in the same direction, and then the alternate teeth the opposite way.

2014年6月6日 · In this instalment Andy demonstrates how to use a pair of setting pliers to achieve the correct set for your saw.

2024年3月4日 · Using an old saw set can be a great way to revive vintage tools and bring them back to their former glory. However, getting the best results from an old saw set requires a few tips and tricks. By following these steps, you can ensure that …

What is a saw set tool or pliers? Saw set pliers are a type of pliers for setting the angle of bend of teeth on a hand saw. Woodworkers use them to reset the teeth of hand saws to a proper angle when servicing them.

These tools range from common blacksmith's equipment to specially designed and marketed saw sets. This process could use any anvil with a suitable surface and any striking tool of appropriate size. The saw tooth to be set is angled over an edge of the anvil and struck in the direction the tooth is to be set.

2024年3月3日 · To use the Stanley 42X saw set, begin by placing the saw blade on the anvil with the teeth facing up. Position the punch on the tooth that you want to set, making sure it is aligned correctly. Hold the punch in place and strike the anvil with the hammer.

2021年1月10日 · I have purchased a few blunt saws lately and needed a good set of files and a sawset setting tool to get them tuned back up again. ...more. A really nice little tool that I purchased on eBay...