2024年7月21日 · I made a top from 3/4” maple plywood, double layers for 1-1/2” total thickness. I screwed the bottom layer to the bench (2x4 frame) then glued+screwed the top layer from the underside for a smooth top. Finished with an epoxy paint. That bench was SOLID.

2011年12月1日 · 2 layers of 3/4" plywood topped with a replaceable 1/4" layer of hardboard. Nothing wrong with laminating the top. However to me a work bench is just that. It will get banged up, the top will get stained, etc. Having the top layer of 1/4" hardboard allows you to replace it when it gets too banged up or too stained for your liking.

2020年3月19日 · Decided to put together a new workbench in the garage. Nothing crazy. Dimensions will be 6 feet long, by 30” deep, and 36” in height. Legs will be made out of 4x4s. Rest of the frame will be 2x6s (with the exception of some 2x4 braces under the work area). Bench work area will be dimensional 2x lumber with a hardboard top.

2018年1月4日 · No. The built in vise merely uses twin screws to move the wooden top halves in and out. Its fine for clamping wood and sheet metal, but doesn't have the clamping force to do serious work. Get a separate steel jawed cast iron vise. Drill holes in …

2021年6月20日 · I need to mount my vice to the new bench. How should I do this? The wood top is 3/4". There is 2.5" below the bottom of the wood top and the top drawer. I'm considering drilling through the top and making a backer of 1" pine or 3/4 ply. Then use bolts, washers and nuts to attach the vise. It's a smaller vise, used for AR stuff mainly. Is this a ...

2012年2月8日 · Firearm Discussion and Resources from AR-15, AK-47, Handguns and more! Buy, Sell, and Trade your Firearms and Gear.

2017年5月30日 · But 90% of the time it was a 30" top, which left a chase behind the cabinets to run electrical and mechanical services. Wall cabinet height should be set off the work surface - 19" is typical. If you want to know more than you ever needed about installing casework and benches, the Hamilton Furniture site has a lot of manuals on it.

2020年11月20日 · Press is better off bolted to your 1 1/2 inch thick bench top with 3/8 bolts and fender washers. Posted ...

2017年10月30日 · Just selling to free up some space in my workbench and liquidate some assets. Paypal, Zelle, Cashapp, or Venmo accepted. Shipping included

2019年6月22日 · I have this old workbench That I bought off of Craig's List about 10 years ago. Actually I bought two...out the door for 100 bucks. This one came with a top that was a hollow core door. I quickly got rid of that hollow core door. Now that we have local Menard's...they sell birch butcher block in 3 different sizes. Attached File