2015年5月18日 · Closing some apps, reducing the size of the RAMDisk or adding more memory to your TC should resolve the problem. "Close programs to prevent information loss" message is caused by running out of RAMDisk. This message is coming from Windows when it runs out of system resources (memory) and can no longer place any data in the RAMDisk.

2015年3月24日 · All users are auto-logged in and some users can only run a small program that was installed while others must launch RDC and login to the terminal server. Three of these thin clients so far have decided to start filling up the RAM and forcing a reboot. An error message with a countdown timer is displayed before the machine is forcibly rebooted.

2015年6月1日 · I have (4) of these new WYSE Z90S2 units, installed in October, that are throwing a "memory full" error message then shutting themselves off. Any idea what is causing this? Thank you. Go to www,wyse.com/kb and select the knowledge base tab. Search for "running out of memory" and review the kb articles.

2015年5月19日 · Just check to make sure the write filter is enabled and you shouldn't normally receive this message. The message is saying that the write filter is full. The write filter will store all changes in a portion of RAM. If this fills up the system must reboot.

2015年1月30日 · Dell and Microsoft have issued hotfixes to fix the memory leak with the write filter. This fixed our issues and the message has not returned. This fix was just released earlier this month 2/2015.

2022年5月6日 · 笔者看后，第一反应是系统有问题，或者硬盘有质量问题，经检测，硬盘正常，并无质量问题，所以直接就安装了系统，从安装系统到使用再反复开关机，直到笔者离开，一切正常。 好景不长，两天后，客户再次反馈，问题依旧。 既然如此，笔者与客户来了一个远程教学，咱们干脆就在BIOS下，直接关掉这个SupportAssist，然后保存重启电脑，恢复正常，如下图. 具体操作，请按图索骥如下： 1. 开机的同时，按F2键（连续按几次），进入戴尔BIOS界面，如下 …

这是戴尔的自检，你这应该是有什么硬件坏了，你找一下这个界面应该有个按钮可以进入检测结果的界面，有红叉的就是那个硬件坏了。 处理了吗？ 我也遇到了. 突然就这样了，咋回事呀？ …

2016年3月29日 · Wyse Z90QQ7P Thin Client shows "running out of available memory" error message and reboot itself. It keeps doing this every several minutes after restart. I tried to use …

2015年8月26日 · Open the Task manager. Here's a tip: Press Ctrl + Shift + Esc. > Run New Task. Make sure you have a check mark beside "Create this task with administrative privileges". Type CMD. Close the CMD window. If issue still persists try to check your memory. On command prompt window, type CHKDSK C: /F /R command and press Enter.

2022年4月10日 · I've managed to get all the drivers installed, but the crashing still persists, however this time 2 new errors called "volmgr" and "WHEA-Logger" came with the critical error. This is all of the...